wie o wie !!
wie heeft nog een mooie onbeschadigde Philips 694 tuner staan ?
en wil hem verkopen voor leuk geld ??
zal er erg blij mee zijn
Hans (zekekuipers@hotmail.com)
philips tuner 694
Moderator: Moderators
-
- Berichten: 8489
- Lid geworden op: 10 okt 2014, 14:12
- Locatie: Veghel
- Contacteer:
Hoi. Welkom en bedankt dat je je als nieuwkomer even hebt voorgesteld.
Ik meen dat forumlid Karsten en/of Albert900 zo'n tuner had staan. Misschien kun je hen een bericht sturen.

Ik meen dat forumlid Karsten en/of Albert900 zo'n tuner had staan. Misschien kun je hen een bericht sturen.
Erres SX5685 SX6290 SX6393 SX6194 SR3390 Aristona AR8530 SG1408 CD1202 Philips GF403 AG2230 GA202 GA212 RH423 RH426 RH532MFB CD104 CD303 CD950 N2221 en veul Superscope.
www.superscopeaudio.nl

Ik heb er in ieder geval geen. Groet, Albert900.Hoewie Loewie schreef:Ik meen dat forumlid Karsten en/of Albert900 zo'n tuner had staan. Misschien kun je hen een bericht sturen.
CD304,FA920,FT930,FT950,FV930,CD931,CD940,CD950,FC931,FC950,DCC900,DCC951,DSC950,
DSS930,CDI220,CD753,DCC730,FC870,EQ670,SX6090/190/290/390/5877,AH489,CD614,AF977,
DAT850 (en z'n JVC halfbroer). 4x RH541,2 xRH544/00R,2xRH544/78R,2xAH586 en 2xAH587.
DSS930,CDI220,CD753,DCC730,FC870,EQ670,SX6090/190/290/390/5877,AH489,CD614,AF977,
DAT850 (en z'n JVC halfbroer). 4x RH541,2 xRH544/00R,2xRH544/78R,2xAH586 en 2xAH587.
-
- Berichten: 8
- Lid geworden op: 06 okt 2018, 18:37
Hello, last week I bought a amplifier 22AH594 + tuner 22AH694. With my speakers 22RH456 great music. My main question is about tuner. Everything sounds good, but TUNING and PRESENT does not move - ever. Can somebody help me ? (When switched off, I measured with a multimeter - not glued.)
Second question is about amplifier. When I switch on/off, there is a "shoot,boom..." to speakers. It's loud and uncomfortable.
Is it because of old power switch or is it a construction? Is it default "feature" of this amplifier ?
Thanks for any advice
EDIT : I found scheme. Can I try set green zone ? (3104, 3103, 3143)
Second question is about amplifier. When I switch on/off, there is a "shoot,boom..." to speakers. It's loud and uncomfortable.
Is it because of old power switch or is it a construction? Is it default "feature" of this amplifier ?
Thanks for any advice
EDIT : I found scheme. Can I try set green zone ? (3104, 3103, 3143)
Ik bezit deze set,de tuner is ok de versterker is defect,vermoedelijk rechter eindtrap.Het uiterlijk is zonder krassen en gewoon mooi.
Yamaha S500,Audio Cambridge cxa 60,philips 109,209,309,nad 7130,Erres TA6000,Erres
TA8000,erresA8000,AH 798. speaker Bose 901 series6,warfdale 10.7,DSS 930,MFB587,AH494,AH487,AH476.
sennheiser HD650,sennheiser HD 598. Dragonfly red+black + jitterbug.
TA8000,erresA8000,AH 798. speaker Bose 901 series6,warfdale 10.7,DSS 930,MFB587,AH494,AH487,AH476.
sennheiser HD650,sennheiser HD 598. Dragonfly red+black + jitterbug.
Your meter problem is more common and it is a mechanical issue. If you would take these meters out of the tuner housing you will find a very tiny screw under the sealing tape on the back of the meter.purplesticks schreef: ↑06 apr 2019, 17:18Hello, last week I bought a amplifier 22AH594 + tuner 22AH694. With my speakers 22RH456 great music. My main question is about tuner. Everything sounds good, but TUNING and PRESENT does not move - ever. Can somebody help me ? (When switched off, I measured with a multimeter - not glued.)
Second question is about amplifier. When I switch on/off, there is a "shoot,boom..." to speakers. It's loud and uncomfortable.
Is it because of old power switch or is it a construction? Is it default "feature" of this amplifier ?
Thanks for any advice
Komentár 2019-04-06 180712.png
EDIT : I found scheme. Can I try set green zone ? (3104, 3103, 3143)
Tuner.jpg
With a bit of luck you can turn it a hair counter clockwise to free the needle. It is actualy the bearing that is adjusted hereby.
The screw wil be sealed with a adhesive and it might not want to turn or you might damage the screwdrivers slot.
In that case not all is lost, you can open the case and carefully bent open the metal bridge. (bent is a bit strong here, you have to be gentle)
As soon as the needle can move it's ok, do not go further or the axle will fall out of the bearing.
Don't know about the noise when you turn it on, i remember that i had the same experience with apparatus from the same time period, it shall not be normal but can't tell you what's wrong at this point, someone else maybe?
succes!
"Hoezo nu wel genoeg? D'r is toch nog plek!" jaja, waar dan? "Ha! d'r kan nog wat in de auto!"
About the 594, it is one of the last "old school" Philips amplifiers and has no speaker-relays. Because of that there is always some sound through the speakers when you turn it on. Whether that sound is louder than usual is unfortunately hard to tell through a forum.
Van alle dingen die ik ben kwijtgeraakt mis ik mijn verstand het meeste...