DIY Philips R 900 rack

Van tekentafel tot soldeerbout, in deze afdeling is alle ruimte voor eigen ontwikkeling van audio gerelateerde apparatuur. Schema's tekenen, print ontwerpen, componenten kiezen, printplaten etsen of laten maken.

Moderator: Moderators

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

DIY Philips R 900 rack

Berichtdoor ducks007 » Vr Feb 09, 2018 2:31 pm

Hello :wink:

I've find a R900 rack for the 900 serie but unfortunaly too far from my home.
So it give me an idee to make a "copy" of this rack and because I work on drawing office it will be nor very hard to do it.
I just should have your help (people who have the real R 900) to give me some dimensions :
for that, I've made a 3D drawing with letters for dimensions and if you can complete my list it will help me very much :pray: :clap:

let's go :dance:

r900 (Large).jpg

tablette sup (Large).jpg

etagere (Large).jpg
Laatst gewijzigd door ducks007 op Vr Feb 09, 2018 2:55 pm, 3 keer totaal gewijzigd.
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

Re: DIY Philips R 900 rack

Berichtdoor ducks007 » Vr Feb 09, 2018 2:34 pm

base (Large).jpg

plateau sup (Large).jpg

montant (Large).jpg
Laatst gewijzigd door ducks007 op Vr Feb 09, 2018 2:59 pm, 3 keer totaal gewijzigd.
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

Re: DIY Philips R 900 rack

Berichtdoor ducks007 » Vr Feb 09, 2018 2:35 pm

montant ar (Large).jpg

dimensions (Large).jpg
Laatst gewijzigd door ducks007 op Vr Feb 09, 2018 3:00 pm, 3 keer totaal gewijzigd.
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

Re: DIY Philips R 900 rack

Berichtdoor ducks007 » Vr Feb 09, 2018 2:37 pm

if the picts are too little, you can give me a mail to have the full size pictures :wink:

If you have picts of the real R900 it will help me too :wink:
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...

Gebruikersavatar
mthecatlover
Berichten: 2399
Lid geworden op: Zo Okt 23, 2011 10:38 pm
Locatie: Noord-Brabant
Contact:

Re: DIY Philips R 900 rack

Berichtdoor mthecatlover » Za Feb 10, 2018 11:16 pm

Afbeelding
"Er zijn twee mogelijkheden om de ellende van het leven te ontwijken: katten en muziek".
Afbeelding =^..^=

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

Re: DIY Philips R 900 rack

Berichtdoor ducks007 » Ma Feb 12, 2018 9:29 am

that's this one, thanks for this Philips publicity :clap:
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...

Albert900
Berichten: 1408
Lid geworden op: Do Apr 04, 2013 10:56 pm

Re: DIY Philips R 900 rack

Berichtdoor Albert900 » Ma Feb 12, 2018 11:50 am

I have such a rack
Afbeelding
will try to do some measurements later this week.
CD304,FA920,FT930,FT950,FV930,CD931,CD940,CD950,FC931,FC950,DCC900,DCC951,DSC950,
DSS930,CDI220,CD753,DCC730,FC870,EQ670,SX6090/190/290/390/5877,AH489,CD614,AF977,
DAT850 (en z'n JVC halfbroer). 4x RH541,2 xRH544/00R,2xRH544/78R,2xAH586 en 2xAH587.

Albert900
Berichten: 1408
Lid geworden op: Do Apr 04, 2013 10:56 pm

Re: DIY Philips R 900 rack

Berichtdoor Albert900 » Ma Feb 12, 2018 11:51 pm

Hi, I have most of the dimensions here. The rest I will try to add Tuesday or Wednesday.
Accuracy is +/- 1mm

Etageres (4x)
A: 450 mm
B: 540 mm
C: 426 mm
D: 565 mm
E: 7 mm

Plateau superieur
F: 490 mm
G: 655 mm
H: 466 mm
I: 680mm
J: 7 mm

Base
K: 20 mm
L: 465 mm
M: 465 mm

Sup
N: 240 mm (approximately, as it is mounted it is hard to measure)
O: 125 mm
P: 340 mm
Q: 485 mm
R: 125 mm
The sides O/P/R are 20 mm (identical to K), side Q is 5 mm thick

Montant droite + gauche
S: 125 mm
T: 1000 mm

For U/V/W/X I measured the distance from floor to glass plate etc.

Floor-bottom 1st glass plate: 363 mm
Top 1st glass plate: 370 mm

Floor-bottom 2nd glass plate: 512 mm
Top 2nd glass plate: 519 mm

Floor-bottom 3rd glass plate: 681 mm
Top 3rd glass plate 688 mm

Floor-bottom 4th glass plate: 870 mm
Top 4th glass plate 877 mm

The cut-outs for the glass plates are 72 mm horizontal (both sides) and 12 mm high. There are rubber inserts to place the glass plates on, thickness .... (I will measure)

Montant AR
Y: I didn't measure Y, but the cut-out lengte on the sides, which is 28 mm
Z: 40 mm
ZZ: not on your drawing, but the cable cut-outs (Y-Z) are each 20 mm above the cut-out for the glass plates.
AA: 125 mm
BB: 1.75mm
Laatst gewijzigd door Albert900 op Vr Feb 16, 2018 7:10 pm, 2 keer totaal gewijzigd.
CD304,FA920,FT930,FT950,FV930,CD931,CD940,CD950,FC931,FC950,DCC900,DCC951,DSC950,
DSS930,CDI220,CD753,DCC730,FC870,EQ670,SX6090/190/290/390/5877,AH489,CD614,AF977,
DAT850 (en z'n JVC halfbroer). 4x RH541,2 xRH544/00R,2xRH544/78R,2xAH586 en 2xAH587.

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

Re: DIY Philips R 900 rack

Berichtdoor ducks007 » Di Feb 13, 2018 9:20 am

Waouuu !
A BIG thank you ! :clap:
now I can adjust my 3d Drawing will all your informations :dance:
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

Re: DIY Philips R 900 rack

Berichtdoor ducks007 » Di Feb 13, 2018 12:05 pm

I've a little question about the right and left corner profile, what is the thickness of those profiles?
and you say O/P/R are 20mm and Q 5mm : is that a bend of 20mm and 5 mm of a plate with a different thickness or is this plate was 5mm thickness with 20mm bends hight ?
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...

Albert900
Berichten: 1408
Lid geworden op: Do Apr 04, 2013 10:56 pm

Re: DIY Philips R 900 rack

Berichtdoor Albert900 » Wo Feb 14, 2018 12:34 am

I added N and BB to the table.
Thickness of the metal used, columns as well as base and sup, is 1.75 mm.

Plate sup is thus also made of 1.75 mm thick metal, with bends of 20 mm (same for base). Except for Q, here only bend down for 5 mm, so there is some more space for a 900-series unit. As you can see on my picture the DSC950 just fits underneath sup, if Q was also 20 mm it wouldn't.

To measure Y and Z I have to take equipment out, will try to do this later this week.
CD304,FA920,FT930,FT950,FV930,CD931,CD940,CD950,FC931,FC950,DCC900,DCC951,DSC950,
DSS930,CDI220,CD753,DCC730,FC870,EQ670,SX6090/190/290/390/5877,AH489,CD614,AF977,
DAT850 (en z'n JVC halfbroer). 4x RH541,2 xRH544/00R,2xRH544/78R,2xAH586 en 2xAH587.

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

Re: DIY Philips R 900 rack

Berichtdoor ducks007 » Wo Feb 14, 2018 2:38 pm

Many thanks Albert, with all your informations, i've rearanged my 3D model :clap:

work in progress :

r900 (Large).JPG

r900-2 (Large).JPG
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...

Albert900
Berichten: 1408
Lid geworden op: Do Apr 04, 2013 10:56 pm

Re: DIY Philips R 900 rack

Berichtdoor Albert900 » Vr Feb 16, 2018 7:15 pm

I added dimensions for the Y-Z cable cut-outs. These are not centered between the glass plates, but all are at 20 mm above the cut-out for the glass plates.

Which format is your 3D design in?
CD304,FA920,FT930,FT950,FV930,CD931,CD940,CD950,FC931,FC950,DCC900,DCC951,DSC950,
DSS930,CDI220,CD753,DCC730,FC870,EQ670,SX6090/190/290/390/5877,AH489,CD614,AF977,
DAT850 (en z'n JVC halfbroer). 4x RH541,2 xRH544/00R,2xRH544/78R,2xAH586 en 2xAH587.

ducks007
Berichten: 136
Lid geworden op: Ma Jul 31, 2017 1:20 pm
Locatie: France - Chalon sur saone

Re: DIY Philips R 900 rack

Berichtdoor ducks007 » Za Feb 17, 2018 11:13 am

Many thanks Albert.
I work with Solidworks (that's the software I used at my job) 8)
Philips DSC950 DSS930 FT950 FT930 DCC900 DCC951 FV930 FC940 FC950 FA930 CD940 CD950 CDC925 FW2017
Marantz DD82 / Hitachi HA 2500M / JVC A-L11
DCC130 / DCC175
...


Terug naar “Ontwikkeling en Design”

Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers en 1 gast