Philips DCC600 reel gear or mechanics needed

Ik wil meer, méér, MEER!!!

Moderator: Moderators

pserci
Berichten: 29
Lid geworden op: di aug 02, 2016 9:17 am

Philips DCC600 reel gear or mechanics needed

Berichtdoor pserci » ma feb 19, 2018 10:17 am

Hi all, another DCC in a trouble. This time with the gear that manage the reels that is polverized....Anyone have this gear or the entire mechanic? Thanks in advance

Paolo

Gebruikersavatar
HermanH
Berichten: 2522
Lid geworden op: vr mei 22, 2015 8:39 pm
Locatie: Omgeving Breda

Re: Philips DCC600 reel gear or mechanics needed

Berichtdoor HermanH » ma feb 19, 2018 12:58 pm

Hi Paolo,

Gear wheel involved is a complicated one. To my best knowledge no replacement is available. I already discarded one DCC600 and am currently very careful with my existing one.

I'm not exactly sure whether DCC300 and DCC91/450 have exactly the same gears. If so they may act as a donor.


Afbeelding

Afbeelding

Pictures by Snameroc from my DCC600
Wat Philips + nog wat Technics spul. Maar niet zoveel als jullie.

pserci
Berichten: 29
Lid geworden op: di aug 02, 2016 9:17 am

Re: Philips DCC600 reel gear or mechanics needed

Berichtdoor pserci » ma feb 19, 2018 2:08 pm

Exactly the same mess....asked on a local 3D printing atelier if it's possible to reproduce. Let you know... Another chance is to change the coupling with idler (o-ring mounted on)....
Thanks for replying

Regards
Polo

pserci
Berichten: 29
Lid geworden op: di aug 02, 2016 9:17 am

Re: Philips DCC600 reel gear or mechanics needed

Berichtdoor pserci » di mar 13, 2018 12:11 pm

Good news:
i made a replica for the original gear by a local 3dprint shop.

dcc600gear1.jpg
dcc600gear2.jpg
if anyone need could be printed again...

Regards, Paolo

@ADMIN could you please move or copy to the most appropriate section of this forum? Thanks in advance

Gebruikersavatar
pkoeleman
Berichten: 120
Lid geworden op: zo feb 02, 2014 9:15 am
Locatie: Omg. Eindhoven

Re: Philips DCC600 reel gear or mechanics needed

Berichtdoor pkoeleman » di mar 13, 2018 12:28 pm

Hello Paolo,

could you send me the print file so I can have one printed for myself.

Or tell us where this file is stored so we can download.
For instance on https://www.thingiverse.com/

There are numerous enthusiasts that have the same problem or will have it soon.

Thanks,

from another Paolo
2x 532, 2x 541, 4x 544, 4x 567, 2x 587, 2x 545, DSS950-930, DSS 930SE, DCC 951, DCC 600, DCC 300, DCC 175, DCC 170, DCC 130, Anti-Mode 2.0, Sonos connect, RevisionOne (1), RevisionOne (2),

snameroc
Berichten: 2886
Lid geworden op: za mei 01, 2010 12:45 pm

Re: Philips DCC600 reel gear or mechanics needed

Berichtdoor snameroc » di mar 13, 2018 12:35 pm

What kind of materials is used for the printing?
Is it elastic?

pserci
Berichten: 29
Lid geworden op: di aug 02, 2016 9:17 am

Re: Philips DCC600 reel gear or mechanics needed

Berichtdoor pserci » di mar 13, 2018 12:43 pm

Hi,
the 3d file is not mine, the 3d service was made by the 3d print lab engineer, and is of their properties, i could only give you their contact, so you can order copies of this gear.
The file, i think, is not on thinginverse...
Material is resin and is not elastic.

This is their web page https://www.romastampa3d.it/

Regards, Paolo

pserci
Berichten: 29
Lid geworden op: di aug 02, 2016 9:17 am

Re: Philips DCC600 reel gear or mechanics needed

Berichtdoor pserci » di mar 13, 2018 12:53 pm

Another thing:
The original gear have a sort of clip on the bottom that lock the gear on it's pin. With the 3d printing, was not possible to replicate this particular detail, so the gear has to be lock with a forelock or some sort of, because the gear looks down and if not locked it will fall. Soon i'll finish the repair and i will share some fotos...
Cheers
Paolo


Terug naar “Gezocht”

Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers en 6 gasten